how to reset canon ip 2770

Initial:

When the iP2770 is turned on, the printer looks normal with GREEN LED flame. But when ordered to print, then the 5200 error will appear, and the LED will turn green ngeblink 8x 1x orange ...

Here's How To Reset Canon IP2770 Error 5200:

1. The printer is off and plugged the power cord.

2. Press the RESUME button two seconds

then press the POWER button until the green light flame (while pressing the POWER button, ... jgn RESUME button is released first)

3. Then release the Resume button, but do not loose the POWER button.

4. POWER button while still depressed, press the Resume button 5 times. Led will flash alternately orange glow green with the last orange. (Not to mistaken 4x because the printer will be totally dead, but it is temporary as well) Then ...

5. Release both buttons simultaneously.

6. Led will blink briefly and then will glow GREEN.

7. And the computer will detect new hardware, just ignore ...

8. Press the POWER button, then the printer will die.

9. Press the POWER button again then the printer will flame and ... PRINTER iP2770 is ready to use.

Other How To Reset Canon iP2770 error 5200:

Turn the printer, and printer will look normal.

Run the printer for printing a document or a print test, then the 5200 error will appear.

Directly unplug the power cord without pressing the button on-off

Open it and slide it into the middle of its cartridges manually (press the latch penguncinya white color behind the head, so that cartridges can be pulled into the middle)

Unplug all cartridges and leave the lid open

Turn the printer, hit the head will move left and right because the lid is still open and will stop in the middle.

Replace the cartridge, and close the right

The printer will return to normal.

Posted in: Komputer